Ambient TOUCH LIGHT Instrukcje Operacyjne Pobierz pdf (Strona 6)

50D0092 Rev 4 Feb 2005 Page 6 of 9 Ambient Technologies

ADivision Of

Transmitter:

General:

The TLM is a touch sensitive On/Off remote control system.

The transmitter will operate the remote receiver from 1foot to a maximum of 20 feet. The operational range is

reduced when batteries are low or when the receiver is inside a metal enclosure.

Initial start up:

1. After initial power up or reset button is pressed, the transmitter is reset.

2. During transmitter reset, all segments of the LCD will be turned on. After ten (10) seconds, the LCD will

be initialized and operational. You will hear a beep during this time and an OFF signal being send to the

appliance

3. After reset, only the room temperature will be displayed on the LCD display.

Manual Mode- On or Off Operation:

1. Since Touch Light transmitter is touch sensitive equipment, we recommend to use only your index finger to

touch. Do not use any metal object to contact or touch the surface. The transmitter will recognize a valid

touch if either side of the surface area are covered more than 20% for a period of at least 1 second

2. To activate a signal, you need to touch either side of the groove surfaces for at least 1 second and then

release your finger. If the touch is valid, it will beep once and a signal will be sent to the receiver. During

this time you will see the transmission icon on the LCD display for a brief time. No other command can

be given until the transmission is completed.

Child-proof protection:

1 2 3 4 5 6 7 8 9

Brak uwag

Ambient TOUCH LIGHT Instrukcje Operacyjne Strona 6